All Products Ship From The USA


Ask a Technical Question:

Please note: We will answer all questions with regards to technical specifications of our units, pricing, wholesale inquiries, and shipping related questions immediately.

You can use the form below to send us a Technical Question.

Ask An Expert

User Matthew Ponsot Asked:

I am seeking a power supply for a Netgear ReadyNAS 314 input 110 output 12volt, 7.5A (4 pin din) Their part number 332-10581-01 Please help! Thank you!

Our Technician Answers:

Hi Matthew. To find the power supply you need, you should simply do a google search for the model number of your device. In this case just put: Netgear ReadyNAS 314 in Google. All you need is to find the voltage (V) and the Amperage (A) of the device.. and match them to the adapters on our site.. Let me know if there is anything else I can help with.

User Bryan Asked:

I have an indoor camera with a 8ft cord. When I replaced the cord with a longer one 15ft and the night vision IR's come on the camera cuts out. What power supply can I use or am I not going to be able to use the longer one. The current supply is 5V 2.0 A I don't want to burn up the camera with the wrong one. Any help would be helpful. Thanks Bryan

Our Technician Answers:

Hi Bryan. With DC loads, there is a loss of voltage that increases the longer the cord is. The solution for this is either to use a thicker (higher gauge wire), or to use a higher amperage power supply. Or to place the power supply closer to the camera, so you can have a shorter DC cord, and a longer AC cord as AC power carries better over longer distances.

User Robert Praski Asked:

I need repleacement power adaptor for Seagate external drive 4T. the specs on burned old one are: AC input 100-240V > 50-60Hz; 0,65A Max; 51-80VA; DC output 12v - 2A; plug external "-" internal"+" Old Manufactured by Asian Power devices Inc.Model #WA-24E12 S/N 849284088. I need something compatable to that - don't want repleacement. European power connector. Thanks ROB

Our Technician Answers:

Hi Rob. Looking at the specs you sent, it is really easy to fine the correct power supply. The input you don't have to worry about because it is standard in all of USA. The DC output is the important part. In this case I see you need a 12 Volt and 2 Amp DC Power Supply, and that the connector has to be center negative. Here is a link to the unit that you need:

User Peter Tommila Asked:

I am looking for an ac power adapter for a claybrooke 10 in 1 radio

Our Technician Answers:

User David M Bullington Asked:

Need to adaptor 100-240V input,12V out 2.5A

Our Technician Answers:

Hi DAvid.. THat is the standard power supply. LIsted under 12V 2.5A Power supplies on the main page. YOu can select both the UL listed or the Non-UL one.. Both will work for your application.